How to Stop Your Ladder From Slipping: 8 Tips for Prevention

The most used home tool are ladders. Whenever we wish to fix something or get something that is beyond our physical reach we tend to turn to the use of ladders as helpers. Whether they are small or big, tall or short. Each ladder has a specific design for a specific purpose.

Using ladders is not always safe, especially when you are using extension ladders. No matter how strong and good quality they are, there is always the possibility of the ladder to slip.

However, there is a solution to each problem. The issue of slipping ladder can be prevented with some simple steps and a few tools as an increase in safety.

How To Avoid Your Ladders Slipping

Choosing the right angle

If your work requires the help of ladder than the first thing you must do, after you have taken the right kind of ladder that is required for that specific job, you have to choose the perfect angle for it.

Analyze the area in which you are going to work and look for the right angle in which your ladder will be stabilized and not slip. The recommended angle is 75.5 degrees.

Using the ladder holders or cleats

To keep the ladder in one place and to prevent the ladder from slipping we can also use ladder holders or cleats. What you have to do is put the holders or the cleats on the ladder.

After you put them make sure that they are put strongly. Before you climb your ladder, secure its legs with holders or cleats on the ground firmly.

Make use of the other accessories

Some more accessories or tools should be used when working with a ladder.

The ladder mitts are useful accessories when you are working with ladders inside your house. Using them will provide you with stability. Most importantly, it will also prevent the decomposition or any kind of damage in the wall.

The ladder stabilizer is also an important tool to use when working with ladders. The ladder stabilizer will connect to the top and will safely sustain the ladder. This makes it very hard for the ladder to slip down the wall or wherever you are working at.

You need to know How To Avoid Your Ladders Slipping if you have planned on using them. Ladders tend to slip a lot, so it's important to know beforehand how to properly set them up so they don't.

Equalizing the level base

Having one leg of the ladder higher or lower than the other leg will make it riskier to work. Not only will the ladder easily slip but it will also be tremendously destabilized.

To make equal both legs of the ladder use outriggers with leveler. This should help you secure that the ladder is leveled.

Investigate the environment

Some factors need to be checked before working with the ladder. The most important factor the be analyzing is the ground. Before putting the ladder on it make sure that the ground is dry and firm.

If the ground is wet, then the legs of the ladder will sink. Unless the work is a necessity you should choose another place with hardened ground to put the ladder on.

Needless to say, there is a wide range verity of tools and products that are to be used when you wish to make your ladder more stabilized when working with them. Nonetheless, here I will mention a few of them which are recommended and are more essential when it comes to stabilizing the ladder.

Use ladder-mat ladder leveler

This product contains four mats. These mats are made of heave-duty rubbery matting. The ladder-mat is to be placed under the legs of the ladder.

You can use as many mats as you are needed to make the ladder more stable and not slippery. Applying the ladder-mat will aid in leveling the working surface.

Use ladder M8rix Industrial Stabilizer

As the name indicates, this product is used to bring more stability when working with ladders. The improvement of this product is tremendous. The ladder M8rix can stabilize the ladder on many different surfaces such as on gravel, wood, and even ice or snow.

This is made possible by the unique engagement of the pin which is placed on the base and the top. It is easy to use and it is multi-functional. You can use this product also in everyday jobs such as cleaning the gutters with complete confidence and safety.

Use the big grip ladder stabilizer and leveler

This product is a sum-up of all the safety you need when you are working with ladders. The big grip ladder stabilizer and leveler is a tool that will keep the ladder vertical and straight on whichever ground you put it, whether it is on level or sloped, downhill, or uphill. This is the ultimate tool, a must-have tool for ladder users.

These tips will aid you if you were to work with ladders on troublesome grounds or inside the spaces of the house.

Keep in mind that there is no such thing as too much safety. Always take precautionary steps and aim towards feeling safe and confident when climbing ladders to work.

Michael is the Editor at thetoolgeeks.com. He used to own a local shop where he sold different tools for 20+ years. He now enjoys researching DIY tools and writing guides about it.

Leave a Comment